Devantech 24V, 49:1 Gear Motor w/ Encoder
Produktdetails
| Artikelnummer | 234970920 | Erscheinungsdatum | 2026/07/02 | Listenpreis | €37.85 | Modellnummer | 234970920 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
- High-Power Gear Motor
- Nominal Voltage: 24V
- No Load RPM: 143
- Stall Current: 13A
- Stall Torque: 1472 oz-in
- Shaft Diameter: 8 mm
- Hall Effect Encoder Included
The Devantech 24V, 49:1 Gear Motor w/ Encoder is a 24v motor fully equipped with encoders and a 49:1 reduction gearbox. It is ideal for medium to large robotic applications, providing cost effective drive and feedback for the user. It also includes a standard noise suppression capacitor across the motor windings.
Connectors
Motor power is connected with a two way 3.96mm pitch terminal Excon type 3961 and has 300mm of cable as standard.
• Black (1): -Motor
• Red (2): +Motor
The encoders connect using a 4 way JST connector (part no PHR-4) at the end of approx 300mm of cable as standard.
The connections are:
• Purple (1): Hall Sensor B V out
• Blue (2): Hall sensor A V out
• Green (3): Hall sensor ground
• Brown (4): Hall sensor VCC
• Wires are the colours from the actual cable
• The hall sensors accept voltages between 3.5v and 20v
• The outputs are open collector and require pull-ups to whatever signal level is required
• On the MD49 they are powered from 12v and pulled up to 5v for the signals
Motor Characteristics
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
Korrekturanfrage