eMoMo HX90HU 5 Button 5 Pin Side Switch for Power Recliner Fixed Remote Controller with USB Port for Lift Chair

This is the genuine eMoMo HX90HU switch. It features 5 buttons and uses a 5-pin male plug. It is suitable for power recliners or lift chairs equipped with 2 motors.When facing the chair, this switch is for the left-side armrest if mounted on outer surface; or for right-side armrest if mounted on inner surface. Features:Five Buttons: Includes 4 butterfly-shaped buttons controlling headrest tilt and chair opening/closing. A small center button with an arrow functions as a reset button, returning the chair to its home position.USB Charging Port: Features a built-in USB charging port outputting 5V at 2A, enabling mobile device charging while using the chair.5-Pin Plug: Connects to the chair's main motor via a standard round 5-pin plug. The wire length is approximately 145 cm (57 inches).⚠ CRITICAL COMPATIBILITY CHECKThe full model number of this switch is HX90HU. Multiple HX90-series switches share identical appearances but are NOT interchangeable (e.g., HX90HUN, HX90HUE, HX90HUEN, HX90HUI, HX90HUIN). Using an incorrect model may cause malfunction.DO NOT order based solely on appearance or model number.ALWAYS remove your existing switch from the armrest and verify its serial number before purchasing.To determine compatibility, check the serial number on the barcode sticker. This switch ONLY replaces units with the exact serial prefixes listed below, followed by a number or "V": SN:E90HU, SN:WT90HU, SN:ZE90HU (Refer to the detailed image guide for location/format verification).If your switch's serial number does not match the prefixes above, do not order this switch.Package includes:1x HX90HU switch1x Aluminum switch cover2x Mounting screws

• Genuine eMoMo HX90HU switch featuring 5 buttons, a single 5-pin plug, and operation of headrest tilt + chair open/close functions. Compatible with 2-motor recliners.
• When facing the chair, this switch is for the left-side armrest if mounted on outer surface; or for right-side armrest if mounted on inner surface.
• ⚠️ CRITICAL COMPATIBILITY DISCLAIMER：The full model number of this switch is HX90HU, there are multiple HX90-series switches that share identical looks but are NOT interchangeable (HX90HUN, HX90HUE, HX90HUEN, HX90HUI, HX90HUIN). Using the wrong one may result in the switch not functioning properly.
• ⚠️ DO NOT order based on appearance or model number alone. ALWAYS remove your existing switch from the armrest and verify its serial number before purchasing.
• ⚠️CONFIRM SERIAL PREFIX REQUIRED: This switch ONLY replaces units with the exact serial prefixes below, and followed by a number or letter "V": SN:E90HU, SN:WT90HU, SN:ZE90HU (See detailed image guide for location/format verification).