Manual Wheat Grass Juicer, Heavy-Duty Stainless Steel Wheat Grass Manual Juicer, Household Health Juicer Suitable for Wheat Grass Fruits, Apples, Pears, Vegetables

product descriptionstandard:Material: Stainless steelColor: SilverInlet diameter: 10 * 10cmFixed desktop thickness: less than 5.5cmWeight: Approximately 2.6kgMain purpose:1. Squeeze wheat grass. Convenient and fast, with high juice yield and no loss of nutrition.2. Squeeze fruits, apples, pears, etc. Juice is slowly squeezed out by hand with a low-speed spiral drill to avoid excessive temperature during rotation, which can cause loss of oxygen and nutrients in the juice. Apples and pears can be cut into 2cm wide strips for easy feeding.3. Squeeze vegetables, cabbage, celery, etc. Carrots are less abundant than fruit juice, so it is not recommended to use this machine.How to use:1. Clean the juicer before use.2. Clamp on the edge of the table (less than 5.5cm).3. Place the food into the feeding port, turn the handle clockwise, the juice will flow out through the filter, and the slag will be discharged from the slag.The package includes:1 juicer

• ● Manual juicer: suitable for juicing wheat straw, celery, broccoli, kale, spinach, parsley, pomegranate, apple, grape, orange, and other fruits/vegetables. (It is not recommended to squeeze too soft fruit pulp, such as coconut meat, tomatoes, mangoes, bananas. Sugarcane/carrots should not be squeezed)
• ●Material: Our stainless steel lemon juicer and manual straw juicer are made using casting technology, sturdy and durable, with a polished surface and unpolished interior. [ Attention ] Do not tighten the screw on the front slag outlet too tightly, just loosen it a little, so that the slag can be discharged smoothly.
• ● Independent design, easy to clean: After each use, remember to disassemble the wheat grinder, clean all components directly with water, dry and assemble for next use. How to disassemble the juicer: Unscrew the two screws on the back cover, remove the back cover, take out the spiral drill, grab the protrusion of the filter with the handle or spiral drill, and then pull out the filter.
• ● Installation clamping method: Clamp the juicer body on the edge of the table, tighten the bottom fixing screws, so that the machine can clamp and firmly fix the table, leaving space for the handle to rotate (the thickness of the table should not exceed 5.5cm). Then, install the handle.
• ● Precautions: 1. Before pressing hard fruits such as apples/pears, they should be cut into 2cm wide pieces and then placed inside. Squeeze something with hard skin, peel it first! 2. Do not put too much material into the hand juicer at once. Add small amounts of ingredients multiple times to achieve better juicing results. 3. Use the feeding rod to press the material to assist in juicing