Precision Parabolic 1-1/8 Bar & Mount Kit Beta (2018-2024) | PDS1C-3901

Precision Installation Instructions

Steering Stabilizer for 1-1/8" Handlebars with mounting kit for Beta 2018-2024. This damper includes a shorter bearing cap seal. This steering damper mounts to the handlebar between the two handlebar clamps. If your handlebar clamps are connected on top or bottom you will need to cut them or purchase separate pieces, aftermarket or PHDS clamps. Handlebar positions are counted from the closest to the rider #1 out. Standard position may not be your bikes stock position please double check the handlebars position on your bike.

This damper has 20 low speed adjustments with detente clicks and 12 high speed adjustments with lobe clicks. The linkage is greased and sealed for long life and is adjustable for wear. The unit as shown weighs aprox. 1.2 Lb (544 grams) and is rebuildable. and is rebuildable. and is rebuildable.

Advantages:

• Unique bell curve damping
• Improved traction out of corners by keeping the rear end compliant
• Does not mount in a dangerous position over the bars to cause injury to your chest or chin
• Does not raise your handlebars at all in most applications
  Can be used with: Stock, Shock & Vibe, BRP, and PHDS clamps in multiple positions
• Can be used with standard handlebars or Flexx Bars, no razed crossbar needed
• Allows you to run a bar pad for your protection and still adjust the damper with it on
• Fully greased and sealed linkage (no lubricating with dirt) wear adjustable linkage to ensure there is no slop in the steering