Seco-Larm SK-1123-FDQ Vandal Resistant Flush-Mount Access Control Keypad; 12~24 VAC/VDC auto-adjusting operation; Tamper output N.C. Dry contact/50mA@24VDC max; Mounts to standard single-gang back box

Seco-Larm SK-1123-FDQ Vandal Resistant Flush-Mount Access Control Keypad; 12~24 VAC/VDC auto-adjusting operation; Tamper output N.C. Dry contact/50mA@24VDC max; Mounts to standard single-gang back boxSECO-LARM SK-1123-FDQ Vandal Resistant Flush-Mount Access Control Keypad; 12~24 VAC/VDC auto-adjusting operation; Tamper output N.C. Dry contact/50mA@24VDC max; Mounts to standard single-gang back box Key FeaturesAll features are programmed directly from the keypad: No need for an external programmerEEPROM Memory protects programmed information in case of power lossDuress code signals a silent alarm if an authorized user is forced to open the door under duressEgress input lets users exit the premises without keying in the codeDoor sensor input for anti-tailgating operationInterlocking input for connecting to a second keypadIP66 Weatherproof rating SpecificationsOperating Voltage: 12~24 VDC/VACCurrent Draw- Standby: 15mA@12VDCCurrent Draw- Output 1 Active: 65mA@12VDCCurrent Draw- Output 1 & 2 Active: 66mA@12VDCCurrent Draw- Keypress: 40mA@12VDCTotal Max Current Draw: 100mA@12VDCOutput- #1 Form C: 1A@30VDCOutput- #2 Transistor Ground: 100mA@24VDCOutput- Duress: 100mA@24VDCOutput- Interlock: 100mA@24VDCOutput- Tamper: 50mA@24VDCInput- Egress: N.O. GroundInput- Door Sensor: N.C. GroundInput- Door Inhibit: N.O. GroundIP Rating: IP66Operating Temperature: -4°~158°FOperating Humidity: 5~95% Non-condensingDimensions: 4-3/4"x3-1/8"x1-13/16"Weight: 16.2-oz

• Dimensions: 4-3/4"x3-1/8"x1-13/16", Up to 1,000 possible user codes (000~999) programmable for output #1 and 100 (001~100) for output #2
• Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
• Outputs #1 and #2 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
• Keypad illuminates when a button is pressed, backlight can be programmed for FULL or AUTO in standby mode
• Up to 50 (01~50) duress codes for output #1, 10 (01~10) for output #2